Others say...

"Sturdy and well built"
Great mount. Researched and viewed at local Best Buy but it was overpriced ($275!!!). Found it on Amazon at less than 1/2 of that. Out of the box, very easy. It recommends attaching it to 3 studs but than can be difficult, depending on your location, if you want it centered (mine was over a fireplace). VERY sturdy. Can supposedly support up to 280 lbs. Seems like overkill, since my 50" Plasma only weighs about 110. Instructions recommend attaching it to 3 studs if you're TV weighs over 125 lbs, so I only used 2. Tilting option works great. "Low profile" option would be difficult due to the limited space allowed for wiring. Might have to invest in so 90-degree connectors for your HDMI/component connections. Very good product. Easy set-up. Very satisfied.

"Very solid, good value"
Very sturdy mount for my 60" Pioneer plasma. I extended it out to the maximum, and hit 3 studs 24" apart.

"wall mount"
This product was perfect compared to my last wall mount i needed a mount wider than 33inches due to the odd placement of the studs above the fire place. With this particular mount it expands much more if needed and i was also able to fasten the mount with 6 lag bolts compared to 4.This set came with alot more features for example it came with two sets of TV brackets a Tilt set And a 1 inch of wall Flat Set also extensions in case of bolt holes being to far apart on Tv THIS PRODUCT WAS PERFECT IT WAS EVERYTHING I NEEDED IT FOR AND MORE WITH FUTURE OPTIONS(2SETS) A++++++++++++++++++

"Almosts fits Sharp 65 inch LCD "
This mount (VMPL3B) was identified by Sanus as the one to fit a Sharp LC65D64U TV. (1)While the kit came with several different sizes of bolts to fit various models, it did not provide the metric size needed for this specific Sharp TV. The four bolts needed were available (M10 - 30mm) at Home Depot, $.80 each (plus washers needed). (2)The slots in the mounting brackets were not wide enough to allow the proper bolts to pass through. I was able to file the slots wider (not difficult)to allow the bolts to pass. After that mount was easy to install with all needed hardware provided and works great. Even with this blip the mount is well worth buying due to the more than $400.00 saving over the mount offered by Sharp.


"Smooth transaction"
I place the order on Sunday and item arrived by Tuesday. I'm very happy with the speed of service and the item.

  

Buy Cheap Software Now!
  Sanus Systems VMPL3B Universal Flat Panel Wall Mount with Tilt for 27" to 84" Displays (Black)

List Price : $229.99
Our Price : from Too low to display

Why I buy this one ?
- Durable powder-coated black finish
- Solid heavy-gauge steel construction
- Fits most 27 to 84 inches flat panel plasma and LCD TVs
- Supports up to 280 pounds
- Easy to install


It's better to buy this one too...

SANUS SYSTEMS VMPL2S Low Profile Universal Plasma Mount
details..
 
Sanus Systems VMAA26S Universal Articulating Mount with Extended Reach for 30" to 50" Displays (Silver)
details..
 
Dayton GOC-3 Glass Optical Digital Cable 3 ft.
details..
 

SANUS SYSTEM VMSA VisionMount Universal LCD/Plasma Mount - Silver
details..
 
SANUS SYSTEM VMPLB VisionMount Universal Plasma Wall Mount
details..
 

Special offer for you..find the cheapest!
ANTOnline offers this stuff with condition New, new for:
Price : Too low to display
Usually ships in 1-2 business days
OurStore Catalog offers this stuff with condition New, new for:
Price : $125.00
Usually ships in 1-2 business days
GizmosForLife offers this stuff with condition New, new for:
Price : Too low to display
Usually ships in 1-2 business days
E-WorldDirectInc. offers this stuff with condition New, new for:
Price : $126.14
Usually ships in 1-2 business days
ElectroGalaxy offers this stuff with condition New, new for:
Price : $126.71
Usually ships in 1-2 business days
ApexSuppliers offers this stuff with condition New, new for:
Price : Too low to display
Usually ships in 2-3 business days
DependableResource offers this stuff with condition New, new for:
Price : $128.79
Usually ships in 1-2 business days
BuyNow Incorporated offers this stuff with condition New, new for:
Price : Too low to display
Usually ships in 1-2 business days
Sunset Technology Inc. offers this stuff with condition New, new for:
Price : Too low to display
Usually ships in 1-2 business days
Brandsplace offers this stuff with condition New, new for:
Price : $133.38
Usually ships in 4-5 business days
What our customer's say!

"flat panel wall mount system", This product was very easy to assemble and mount on the wall. Securely held the 65 inch tv that I mounted and the tilt works well to make viewing easier.

"Plasma TV Mount", This is a very nice mount. Comes with pretty much everything you need. i mounted a 60" Pioneer and it works very well.

"As advertised.", Bought for a 46" Panasonic Plasma TV. Easy to install and works as advertised. Only issue is the belief that I could mount on the wall and tilt it forward enough to do my connections. Not the case. It does tilt to improve viewing angles, but not enough to really make connections. Great thing about this mount is the ability to easily slide the TV left or right instead of taking the whole thing down and remounting if you decide the TV should go "a little more to the left". Plus, the price on Amazon was over a hundred bucks cheaper than my local stores. No worries about having my $2000.00 plasma mounted on the wall with this mount. In addition, it will be very easy to mount a larger HDTV in the future.

"No support for Sharp Aquos 65" LCD", Come on guys, would it kill you to add the 4 m10-5-30mm $0.80 bolts to the package and make the slots on the brakers wide enought to take the 10mm bolt? After all, it is the only 65" lcd on the market, so it sounds like a great idea to support it, but groteskly overlooked by some rookie engineers!?

With regards to the bolts, Home Depot has them, but the other user who left a review on the bolts left some importan information out (cost me 3 trips to the store), there are 3 types of M10 sizes, M10-1 M10-5 and M10-25. The right size is M10-5-30mm. You will have to file the slots on each of the 4 corners in order to fit the new bolts. This is a bit tedious and it takes about 30 mins to complete.

"Feel Safe Hanging your Expensive TV", Yes, the install is easy. Yes, It came with everything you could possibly need for any Flat Panel TV 27" to 84". But what really matters is do you feel safe mounting more than $1500.00 of equipment on your wall. I Weight about 180lbs and I was doing pull ups on this thing before I put my TV on it. I was more worried about the wall but this product is HEAVY DUTY. Worked perfectly with my LG 47LC7DF 47" LCD HDTV . LOL - I almost did not put my TV up so I had a place to do pull ups at home. - LOL!.



 
You might need this...

Sharp Aquos LC65D64U 65-Inch 1080p LCD HDTV
details..
 
Pioneer PDP-6020FD 60-Inch Class KURO Plasma HDTV
details..
 
Pioneer PDP-6010FD 60-Inch 1080p Plasma HDTV
details..
 

Cables To Go - 40315 - 2M (6.5ft) Velocity HDMI Digital Video Cable (Blue)
details..
 
HDMI Cable 2M (6 Feet)
details..
 
Read this reviews before You buy...

"Flat Panel Wall Mount-Sanus System VMPL3B", Great choice for a sturdy wall mount. Recommend the additional extender (sold seperately) if mounting a large, heavy plasma. Mine is a 65" Panasonic that weighs 180lbs. This mount comes with all the nuts, bolts, screws and hardware that you'd ever need to get the job done. (Can't comment on ease of instructions because I had the Geek Squad install my system.)

"Big things come in small packages", This wall mount ships in a small box, but can hold a heavy load! I like the flexibility of installing with either the tilt or low profile. The hardest part of the installation was lifting the television up over my fireplace.

"Great Wall Mount", I have been very happy with this wall mount. Makes viewing and cleaning the tv simple and fast. Great price.

"Easy to install; Easy to use.", This mount was very easy to install and continues to be very easy to use. I am using this mount to hold a Pioneer 60" Plasma. I have mount attached to 3 studs and it feels very secure.

"Solid Construction", Don't let the Electronic Stores sucker you into purchasing their brackets with a new LCD or Plasma! This was the EXACT same bracket they were trying (more like forcing), for more than double the price. Their own installers laughed and confirmed it is identical and said most people do not check online and pay their Sucker Tax. They also confirmed that is where they make all of their money on the television sales with overpricing the Brackets & Cables.

This bracket is a solid construction with a pretty low profile. It also has a 15 degree tilt (although I would have liked at least another 5-10 degrees). If you have the extra couple inches of depth, the tilting feature is definitely worth it!

  
 
 

All the software listed in this directory are shareware and commercial software. There are no free software here. We have many utilities which run on windows, mac / macintosh, linux and unix. As one of the download directory in internet we have many software and application. All of our applications / app are downloadable for your computer. We also have shareware, demo, osx, linux, xp, windows, 95, 98, 2000, win, winfiles program file. The extension of files may vary, it can zip, exe, jpg and many more. We don't support illegal software like hack, crack and serial number. No hacking and cracking.

Online PAD Generator / Download Site / Term Of Use / Privacy Policy / Disclaimer

  
 

Copyright ? 2004-2008. Shareware Download, Files Download. All Rights Reserved.